MANUFACTURING
Wood Defect Detection
Wood Defect Detection. What it takes to run it.
The live knot, the dead knot, the check and the split boxed on the grading chain, the borderline board held for the grader.
// 01 · The question
“Is that knot live or dead, and is this crack a check the grade allows or a split that costs it?”
// 02 · Why it is hard
A live knot with a shadow across it and a dead knot's dark ring look alike from directly above, the one angle the chain's camera has. A check and a split are both long, thin, dark grain openings the camera cannot tell apart by shape, because the rule tells them apart by where on the board they fall.
// 03 · What the labels have to be
Bounding box
Decided before the first frame
A knot's grade is set by its width, and a box's width is that measurement. A check and a split are told apart by where they fall along the board's length, not by their shape, so the model finds the crack and the rule reads its position; nothing here needs an outline, so a mask would cost labeling time and change no grade.
This is the decision that is expensive to reverse. The geometry has to match what the answer contains, and finding out it does not means labelling the set a second time.
// 03a · What it finds
A live knot, grown in with a tight edge
boxed for its width, read off the camera already over the chain after the planer
A dead knot, encased in its dark ring
boxed as its own class, since the ring is what tells the grade it can fall out when the board is machined
A check or a split along the grain
boxed where it opens, the box's position along the board's length read against the trim allowance
A board the model doubts
a dark ring under a shadow, or a crack caught at the edge of the trim allowance, held for the grader before the board is sorted
// 03b · What it checks
- 01
The knot's boxed width against the grade rule's own limit for the board's width, read off the box rather than guessed from the knot's class alone.
- 02
A check or split's position along the board's length against the trim allowance, so the same crack is a shorter board within the allowance and a lower grade past it.
- 03
The rule's schedule, cooldown and severity, approved before it goes live.
- 04
A doubted frame, the dark ring under a shadow or a crack at the edge of the trim line, held for the grader before the board is sorted rather than scored either way.
// 03c · What the line provides
- The camera already over the chain after the planer; no new camera, no new hardware.
- Frames from this mill's own species and grade book, not a generic lumber catalogue, since a spruce knot and a pine knot are different colours on a different background.
- The grade book's own thresholds in writing: how large a knot may be for the board's width, where the trim line falls, what counts as a reject resin pocket or wane edge.
- The grader on the stool, for the borderline board the model doubts, the way the chain already decides today.
// 04 · How we run it
Three parts of one loop, on this job.
LexAnnotate
Defect Annotation
Pixel-level defect annotation for surface scratches, cracks, dents, weld faults, and assembly misalignments. Multi-sensor alignment for multi-camera inspection systems.
LexInsight
Line Performance
Ask which shift or which line is producing the most of one defect class, and get an answer with the frames behind it, graded against the plant's own written standard.
LexAlert
Quality Alerts
Monitor defect detection accuracy across changing production conditions. Detect when lighting shifts, new materials, or equipment aging degrades model performance. Auto-retrain to maintain 99%+ accuracy.
// 05 · What breaks it after launch
A customer's grade book tightens the knot limit, or the mill signs a buyer who grades checking more strictly. The boards coming down the chain are unchanged and every box the model draws is still correctly placed, while the grade that box should earn has moved. The first evidence is the grader overriding the model's grade in one direction on the borderline boards, not a drop in the model's own confidence.
It is not the only one that can get this use case, it is the one that usually gets it first. All ten conditions.
// 06 · In manufacturing
Defect Detection at Scale
The Challenge
Vision models performed well in pilots but lost accuracy as factory conditions shifted.
Our Execution
Built pixel-level annotated datasets and multi-sensor alignment for reliable defect detection.
The Result
Maintained 99%+ defect detection accuracy across changing production environments. Reduced unplanned downtime.
99%+
Accuracy maintained in production
// 06a · Questions we get asked
Does this replace the grader on the stool?
No. It boxes every knot, check, split, resin pocket and wane edge on the camera already over the chain, and holds the borderline board for the grader before it is sorted. The call on a doubted board, the shadowed ring or the crack at the edge of the trim line, is still the grader's, the way it is today.
How does it tell a live knot from a dead knot?
From the same two boxed classes, trained on this mill's own boards. A live knot is grown in with a tight edge; a dead knot is encased in a dark ring that can fall out when the board is machined. Directly overhead, under a shadow, the two can look alike, and a board the model doubts goes to the grader rather than being scored either way.
What about a check that is not actually a split?
The rule reads the crack's position along the board's length, not its shape. A check within the trim allowance may still make the grade; a split past it, or one running through, costs the grade or sends the board to the trim saw. The model's job is finding the crack; where it falls decides the rest.
What happens when the mill cuts a new species or signs a tighter grade book?
A new species, pine after a year of spruce, changes the colour and background the model learned, so a window of frames from the first shift is labeled and folded in. A tighter grade book changes nothing in the frame at all; the boards look the same and the labels are still correctly placed, so the signal is the grader overriding the model's grade on the borderline boards, not a drop anywhere in the model.
// 07 · Also in manufacturing